5 - 6 Quick Check® 600/800 Series User’s Guide
Printing Guidelines
The verifier supports two different Hand Held Products serial printers:
• Quick Check
®
Standard Speed Printer (QCP)
• Quick Check
®
High Speed Printer (QCHSP)
The QCP and QCHSP are both impact printers.
When you first receive your printer, you should unpack it carefully. Before
attempting to use it, inspect the contents of the package for any shipping
damage. If there is evidence of damage, please keep ALL packing materials and
contact the delivery carrier as soon as possible for the claim procedure.
Confirm that you have the following items:
•Printer
• One roll of paper
• Power supply
For optimal printer performance, follow these general guidelines for any type of
printer:
• Never place the printer where it is exposed to direct sunlight.
• Never apply power while you are plugging or unplugging an input connector.
• Do not print without paper or a ribbon because this may damage the print
head.
• Do not subject the printer to temperatures below 5° C or above 40° C during
operations or to a sudden change in temperature.
• Insert the connectors so that a slight pressure seats the cable properly. Never
force the connectors because this could
damage the cable.
Using the QCP or QCHSP
The QCP and QCHSP models are shown on page 5-7.
To Next Page
Loading...
