4.6. Changing the battery
1. Remove the top cover (see step 4.2.)
2. Loosen spring (J) and spring (K) from the batteries by pressing
them together and pulling them out of the frame.
3. Release the fastons on the batteries (L).
4. Remove the batteries from the frame
5. Position a new battery in the frame and reconnect the cables.
NOTE
NOTE THE MARKINGS ON THE FASTONS (SEE PHOTO
OF ELECTRICAL DRAWING)
6. Refit the springs
7. Test the operation of the portable motor.
8. Refit the top cover (see step 4.3.).
p. 13
2540 / 2545 • REPAIR
WJ
K
L
To Next Page
Loading...