Technical specifications
28
9 Technical specifications
This product complies with the regulations and guidelines for medical aids
and carries a CE symbol.
The product meets the requirements and standards below. These are
checked by independent institutions.
Standard Definition/description
Weight
test
dummy
EU guideline
93/42 EEC
Applicable as mentioned in Appendix 1 N/A
NEN-EN
12182 (1999)
The requirements from EN12182 (1999) as mentioned
in NEN-EN 12184 (1999): Technical aids for the
handicapped - General requirements and test methods
October1997
160 kg
NEN-EN
12184 (1999)
Class B
Electric wheelchairs, scooters and accompanying
battery chargers - Requirements and test methods April
1999
160 kg
ISO 7176-8
Requirements and test methods for impact, static and
fatigue strengths July 1998
160 kg
ISO 7176-9 Climate tests for electric wheelchairs N/A
ISO 7176-14
Requirements and test methods for control systems for
electric wheelchairs 1997
N/A
ISO 7176-16
Requirements for resistance to ignition of upholstered
parts May 1997
N/A
ISO 7176-19
The Alex meets the crash test requirements as
described in ISO 7176-19
75 kg
Controllers Min. Max. Unit
Joystick N
Swing-away controller N
Electronic switches N
Parking brake N
Installation battery charge plug N
Batteries Max. Unit
Maximum dimensions batteries
260x172x210
10.25x6.75x8.25
mm
inch
Battery capacity 60 / 74 Ah
Battery charger Max. Unit
Maximum permissible charging voltage 24 V
Maximum charging current 12 Arms.
Connector type Neutrik NC3MX
Insulation Class 2 double insulated
To Next Page
Loading...
