RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this symbol
on your machine or in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe operating
practices.
UNDERSTAND SIGNAL WORDS
A signal word—DANGER, WARNING, or CAUTION—is
used with the safety-alert symbol. DANGER identifies the
most serious hazards.
Safety signs with signal word DANGER or WARNING are
typically near specific hazards.
General precautions are listed on CAUTION safety signs.
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual,
and all safety signs on your machine. Follow all
recommended precautions and safe operating pro-
cedures.
Keep signs in good condition. Immediately replace
any missing or damaged signs.
-6-
CAUTION
WARNING
CAUTION
FIGURE 15
OPTIONAL FRONT HYDRAULIC DRIVE
(“H” SERIES)
ITEM PART NO. DESCRIPTION
1. S382 Top Motor Hanger
2. S383 Bottom Motor Hanger
3. 17G141 3/8’’ x 1-1/4’’ Bolt GR.5
4. K60 3/8’’ Nut
5. 12V66 5/16’’ x 3/4’’ Bolt
6. T116 5/16’’ Nut
7. 3G22 5/16’’ x 1-3/4’’ Roll Pin
8. S411 Secondary Drive
9. X97 Hair Pin
10. G110 3/8’’ x 3/4’’ Bolt
11. B68 3/8’’ Lockwasher
12. X67 3/8’’ Flat Washer
13. --- 5/16’’ Set Screw
14. S463 Primary Drive
15. S386 Motor Unit Mount Pin
16. S384 Hydraulic Motor Mount
17. DF1A Hydraulic Motor (Super 7+4)
* ST88 Hydraulic Motor (Twin Auger)
18. DF7 1/2” Close Nipple
19. DF15 Flow Control Valve
1/2” Street Elbow
1/2” x 2” Pipe Nipple
1/2” Pipe Tee
1/2” Check Valve
Hydraulic Hose - 10-1/2”
Extra Unit Drive Kit
Drive Kit (complete Super 7+4)
20. HE58
21. DF17
22. DF8
23. DF18
24. S395
25. S388
26. S412
27. ST90
-55-
Drive Kit (complete Twin Auger)
ALL PARTS
ALL PARTS #1 THRU #8
To Next Page
Loading...
