To Next PageTo Next Page
Need help?Do you have a question about the H&S HDII RAKE and is the answer not in the manual?
Form for registering the product warranty with the manufacturer.
Checklist for dealers to ensure the rake is ready for operation before delivery.
Checklist for dealers to convey essential information to the customer during delivery.
Explains the meaning and use of the safety alert symbol for personal injury awareness.
Details signal words (DANGER, WARNING, CAUTION) and emphasizes following safety instructions.
Highlights specific warnings for avoiding injury during operation, like staying clear of moving parts.
Lists critical safety rules to prevent serious injury or death during operation and maintenance.
Information on how to properly store the jack when not in use.
Details on securing the rake beams for transport.
Instructions for securing the rake wheels for transport.
Explains how to adjust the center frame, emphasizing the need for motion.
Describes the switches and their functions on the control box for rake adjustments.
How to adjust rake beams for desired windrow width.
How to adjust the hitch for proper rake beam leveling.
How to adjust rake beams for even ground pressure using the ratchet jack.
How to adjust rake wheel ground pressure using nuts and collars.
How to adjust rake beam tilt for different hay conditions.
How to angle rake beams using control box switches after widening the frame.
Identifies the location and quantity of the twelve grease fittings on the rake.
Lists all decals on the rake, their part numbers, and descriptions.
Describes the ball hitch as an optional attachment for smoother operation.
Provides guidance on how to order replacement parts through an authorized dealer.
Step-by-step guide to convert the hydraulic system to an open center configuration.
General| Brand | H&S |
|---|---|
| Model | HDII RAKE |
| Category | Farm Equipment |
| Language | English |
