To Next PageTo Next PageWhy won't the engine start on my H&S Farm Equipment?
If the engine of your H&S Farm Equipment doesn't start, first ensure it has gas. Then, check that the gas shut-off is open. If it still doesn't start, set the choke to full, as it might not be getting gas.
What to do if my H&S LW1100 Farm Equipment machine doesn’t wrap in any mode?
If your H&S Farm Equipment machine isn’t wrapping in remote, manual, or automatic modes, first press the start/reset button. Then, make sure the wiring harness is properly connected to the control box and the engine.
What to do if my H&S LW1100 Farm Equipment machine doesn’t wrap in the automatic mode?
If your H&S Farm Equipment machine isn’t wrapping in automatic mode, first press the start/reset button. Also, ensure the pusher is in the home position. If it's not, switch to manual mode and manually return the pusher to the home position.
What to do if my H&S LW1100 Farm Equipment machine doesn’t wrap in the manual mode?
If your H&S Farm Equipment machine isn’t wrapping in manual mode, first press the start/reset button. Then, ensure that the mode selection switch is set to manual mode.
Why is there no operation of all functions when a function switch is activated on my H&S LW1100?
If all functions of your H&S Farm Equipment aren't working when a function switch is activated, check that the power switch is on. Check the vehicle wiring for power into the system, and check the display for system status. Also, check for proper grounding of the vehicle’s electrical circuit and inspect the vehicle’s hydraulic system.
Why certain functions do not work on my H&S LW1100 Farm Equipment?
If certain functions of your H&S Farm Equipment do not work, check the wiring connection from the system to the valve coil or the output function that isn't working. Check the function’s coil and the display for system status. Also, check the vehicle’s hydraulic and electrical systems.
What to do if there is no power at the control box of my H&S LW1100?
If there is no power at the control box of your H&S Farm Equipment, check the 25 Amp fuse located in the engine start box. Also, check the wiring connections from the engine start box to the main control box.
Why is the function operating intermittently on my H&S LW1100 Farm Equipment?
If a function on your H&S Farm Equipment operates intermittently, check for a loose connection at the function switch and at the valve coil. Also, check the display for system status.
What to do if plastic tears between tensioner and bale on H&S LW1100?
If the plastic tears between the tensioner and bale on your H&S Farm Equipment, make sure the film holders are free by turning them by hand. Consider using a higher quality plastic that is more tear-resistant. If the film is damaged, unroll it until the damaged area is removed. If tensioners are tacky due to adhesive buildup, clean them with mineral spirits.
How to fix wrinkles in plastic while wrapping with H&S Farm Equipment?
If wrinkles appear in the plastic while wrapping with your H&S Farm Equipment, check to make sure the wrap is threaded properly.
Alert to potential personal injury when seeing the safety-alert symbol.
Defines DANGER, WARNING, and CAUTION signal words used with safety symbols.
Details the maximum transport speed for the implement and its implications.
Lists crucial warnings for safe operation, maintenance, and avoiding injury.
Highlights warnings about leaks, exposed decals, and tail section position.
Provides essential rules for safe operation, including personnel, adjustments, and clothing.
Explains the emergency stop switch function and operation procedures.
Explains how to determine fastener grade and provides torque values.
Regulations and speed limits for towing the equipment on public roads.
Information regarding safety decals and reflectors on the Linewrap.
Guidance on positioning the wrapper for optimal operation and storage.
Step-by-step instructions for loading plastic film onto the machine.
How to adjust bale guides for proper bale centering during wrapping.
Instructions for using bale risers for both round and square bales.
Description of switches and functions on the main control panel.
How to set bale adjustment switches for desired film coverage.
Detailed steps for wrapping bales, including film amount adjustment.
Steps to wrap bales using the manual operation mode.
Steps to wrap bales using the automatic operation mode.
Steps to wrap bales using the optional remote control.
Procedures for completing wrapping, finishing bales, and pushing them off.
Steps for detaching and preparing the wrapper for transport.
Safety guidelines for performing inspection or maintenance on electronic systems.
Regular maintenance tasks for the transmitter and connections.
Description of the remote control system, its modules, and display functions.
Details on transmitter lights, error codes, and address programming.
Information on adding and using the optional remote control for the Linewrap.
Details on the optional hydraulic steering system for the Linewrap.
Information on optional accessories like LED lights and square bale riser shelf.
Instructions for cleaning, packing, and lubricating wheel bearings.
Guidance on checking and maintaining the hydraulic oil level and filter.
How to lubricate pusher slides and related components for smooth operation.
Location and recommended intervals for lubricating various grease fittings on the machine.
Troubleshooting steps for issues with plastic film wrinkles or tears during wrapping.
Common reasons for the engine not starting and where to find more help.
Solutions for the machine not wrapping in any mode or specific modes.
Diagnosing issues with the control box, outputs, inputs, and display.
Reference charts for status display error codes and common problem solutions.
General| Brand | H&S |
|---|---|
| Model | LW1100 |
| Category | Farm Equipment |
| Language | English |
