-18-
INSTRUCTIONS FOR ORDERING PARTS
PLEASE RECORD NUMBERS FOR YOUR UNIT FOR QUICK REFERENCE
ABOUT IMPROVEMENTS
H & S IS CONTINUALLY STRIVING TO IMPROVE IT’S PRODUCTS
We must therfore, reserve the right to make improvements or changes whenever it becomes practical to do
so without incuring any obligation to make changes or additions to the equipment previously sold.
All service parts should be ordered through your authorized H & S dealer. They will be able to
give you faster service if you will provide them with the following
1. Model & Serial number is located on the inside right pole mount, under center frame.
2. All reference to left or right apply to the machine as viewed from the rear.
3. Parts
should not be ordered from illustration only. Please order by complete part number.
4. If your dealer has to order parts - give shipping instructions:
VIA truck - large pieces (please specify local truck lines)
VIA United Parcel Service (include full address)
OPTIONAL EQUIPMENT
BALL HITCH
The ball hitch is an option that can be added
at any time. It allows for smoother operation in the
field, by eliminating the distance between the clevis
hitch and the tractor drawbar. Simply remove the
clevis hitch and replace it with the ball coupler and
install a 2-5/16” ball to the tractor drawbar.
To Next Page
Loading...
