84
2．Change from petrol to LPG:
Shut off the petrol switch, When petrol in the carburetor is about to be used up,
the engine runs slower, switch on the LPG switch rapidly to fuel by LPG.
Outpouring limit valve
Once the outpouring limit valve is opened (see FIG A), LPG is flowing to the
LPG solenoid valve through the outlet When outpouring exceeds the stated value, or
the pipe is broken, the outpouring device on the valve will be closed automatically. If
leaving the forklift unused for a long term, you should close the limit-outpouring
valve.
Adapter
The adapter is to mix the vaporized LPG with air and to send them into the
engine to meet kinds of working conditions according to the engine.
LPG cylinder
1 f unction
It composed of safety valve, LPG inlet, quick fitting and other relevant
accessories. It supports and stores fuel, and it is fixed at the back of truck. The
functions:
a.shut off valve
It control inlet and outlet line of the LPG.
b.Charging limit valve
open the charging limit valve to charge LPG till the charging device is automatically
closed when 70%- 80% volume of the container is full.
c.Level indication
The digital shows percentage of the remainder volume.
d.Outpouring limit valve
When outpouring exceeds the stated value, or the pipe is broken, the outpouring
device on the valve will be closed automatically.
e. Safety valve
Safety valve will open automatically when pressure in cylinder is over the standard
pressure.
2. Main parameters
Work temperature:-40~+60℃；Work pressure ：2.2MPa；opening pressure of
safety valve：2.5±0.2MPa；Max. copacity ：80% of cylinder volume。
To Next Page
Loading...