Need help?Do you have a question about the HANGCHA CPQD15N-RW21 and is the answer not in the manual?
General| Model | CPQD15N-RW21 |
|---|---|
| Category | Forklifts |
| Load Capacity | 1500 kg |
| Load Center Distance | 500 mm |
| Lift Height | 3000 mm |
| Mast Type | Duplex |
| Lift Speed (unloaded) | 520 mm/s |
| Lowering Speed (loaded) | 450 mm/s |
| Overall Width | 1070 mm |
| Overall Height (Mast Lowered) | 2070 mm |
| Tire Type | Pneumatic |
| Free Lift | 150 mm |
| Max. gradeability (laden/unladen) | 15%/20% |
| Lift Speed (loaded) | 0.35 m/s |
| Lowering Speed (unloaded) | 0.5 m/s |
Covers essential checks to be performed every 8 hours or per shift for safety.
Guides for safely starting the diesel or gasoline engine of the forklift.
Instructions on how to safely travel and steer the forklift.
Steps for correctly picking up loads with the forklift forks.
Procedure for safely stacking loads at the deposit area.
Instructions for safely removing loads from their deposit location.
Overview of scheduled maintenance tasks based on hours of operation.
How to operate the switch for dual fuel (LPG/gasoline) selection.
Procedures for starting the engine using gasoline or LPG.
To Next Page