40
Brake system
Check for brake condition when the
control handle on horizontal position
and vertical position.
Check the inching switch for
looseness or damage.
Check the installation for fastening.
Check the surface abrasion for
equality.
Check if the clearance is proper and
adjust, if necessary.
Check the brake for flexibility and
effective.
Hydraulic system
Check for oil level, change oil
Check for block, return spring stuck
or damage
Check for wiring looseness.
Check for safety valve operation
condition.
Measure safety valve pressure
Check for oil leak, looseness,
collapse, deformation and damage
Check hydraulic pump for oil
leakage or noise
Check pump drive gear for wear
Check for inching switch work
condition.
Check inching switch for looseness
or damage.
To Next Page
Loading...
