To Next PageTo Next PageHow to fix faulty compressor contactor in HANKISON SPX HES1250?
If the compressor contactor in your HANKISON Dehumidifier is faulty, check the wiring and operation of the contactor and the auxiliary contact.
How to fix HANKISON SPX HES1250 temperature sensor?
If the temperature sensor or the wiring to the sensor is open or shorted in your HANKISON Dehumidifier, replace the sensor or repair the wiring to resolve the problem.
General| Brand | HANKISON |
|---|---|
| Model | SPX HES1250 |
| Category | Dehumidifier |
| Language | English |
Safety precautions for pressure-containing equipment.
Electrical safety requirements for equipment operation and service.
Guidelines for selecting an appropriate installation location and clearances.
Instructions for connecting air and water lines, including bypass piping.
Guidance on wiring the dryer according to specifications and electrical codes.
Specifies minimum/maximum operating conditions for the dryer.
Steps for starting the dryer and operating modes (Manual/Scheduled).
Routine tasks for air-cooled and water-cooled units, and drain checks.
Procedures for checking terminals, drains, and replacing filter cartridges.
Identifies causes and corrective actions for moisture in downstream lines.
Addresses issues like power loss, compressor off, and alarm lights.
Diagnosing and resolving high discharge temperature issues.
