To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI Chiller?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI SCHYTJ-2000?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Provides critical safety information and warning symbols for user protection.
Covers the entire installation process, including conditions and requirements.
Outlines prerequisites and environmental conditions for installation.
Describes the different controller types and their functions.
Steps to modify set temperatures and factory parameters on the split controller.
Details how to adjust parameters via the LCD controller interface.
Provides guidelines for regular maintenance tasks and safety.
Outlines weekly maintenance routines for optimal performance.
Lists common fault codes, their causes, and recommended solutions.
General