5
PRELIMINARY EXAMINATION
ORP model
BL101-00, without mounting kit
• HI20083 ORP/temperature probe
• ORP test solution (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
BL101-10, with in-line mounting kit
• HI20083 ORP/temperature probe
• Pool controller aspiration filter
• Pool controller injector, " NPT thread
• Saddle for Ø 50 mm pipe (2 pcs.)
• ORP test solution (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
• PVC aspiration tubing (flexible)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid dispensing tubing (pump to injector)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
BL101-20, with flow cell mounting kit
• HI20083 ORP/temperature probe
• Flow cell for BL100/BL101
• Mounting panel assembly for BL100/BL101
• Pool controller aspiration filter
• Pool controller injector, " NPT thread
• Saddle for Ø 50 mm pipe (3 pcs.)
• ORP test solution (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
• Quick tubing fitting " to 12 mm (2 pcs.)
• Flow cell valve (2 pcs.)
• PVC aspiration tubing (flexible)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid dispensing tubing (pump to injector)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid tubing (flow cell)
length: 10 m
OD: Ø 12.0 mm; ID: Ø 10.0 mm
OD: Outer Diameter; ID: Inner Diameter
Note: Save all packing material until you are sure that the instrument works correctly. Any damaged
or defective item must be returned in its original packing material with the supplied accessories.
To Next Page