Hanna Instruments BL100 - Preliminary Examination

4
PRELIMINARY EXAMINATION
1. PRELIMINARY EXAMINATION
Remove the instrument and accessories from the packaging and examine it carefully. For further
assistance, please contact your local Hanna Instruments Office or email us at tech@hannainst.com.
Each instrument is delivered in a cardboard box and supplied with:
pH model
BL100-00, without mounting kit
• HI10053 pH/temperature probe
• 4.01 pH Buffer solution, 20 mL (3 pcs.)
• 7.01 pH Buffer solution, 20 mL (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
BL100-10, with in-line mounting kit
• HI10053 pH/temperature probe
• Pool controller aspiration filter
• Pool controller injector, " NPT thread
• Saddle for Ø 50 mm pipe (2 pcs.)
• 4.01 pH buffer solution, 20 mL (3 pcs.)
• 7.01 pH buffer solution, 20 mL (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
• PVC aspiration tubing (flexible)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid dispensing tubing (pump to injector)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
BL100-20, with flow cell mounting kit
• HI10053 pH/temperature probe
• Flow cell for BL100/BL101
• Mounting panel assembly for BL100/BL101
• Pool controller aspiration filter
• Pool controller injector, " NPT thread
• Saddle for Ø 50 mm pipe (3 pcs.)
• 4.01 pH buffer solution, 20 mL (3 pcs.)
• 7.01 pH buffer solution, 20 mL (3 pcs.)
• Power connection cable
• Instrument & electrode quality certificates
• Instruction manual
• Rapid coupling " to 12 mm (2 pcs.)
• Flow cell valve (2 pcs.)
• PVC aspiration tubing (flexible)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid dispensing tubing (pump to injector)
length: 5 m
OD: Ø 6.0 mm; ID: Ø 4.0 mm
• PE rigid tubing (flow cell)
length: 10 m
OD: Ø 12.0 mm; ID: Ø 10.0 mm
OD: Outer Diameter; ID: Inner Diameter