5756
If Delete is pressed.
Use ARROW key to focus the record to be deleted and then press
Confirm.
Press ESC to exit.
If Delete All is pressed the instrumet asks for confirmation.
Press Confirm to confirm or ESC to exit without deleting.
If AutoLog is pressed, the lot information of the specific range are
displayed.
Use the ARROW keys to scroll the lots.
Press the Delete All function key to enter the
Delete All
lots
screen.
Press the Delete function key to enter the
Delete lot
screen.
Press the More function key to view the records information of the focused
lot.
If More is pressed.
Notes: • At Power Off the current lot is automatically closed.
• If the 600 records space or 100 lots are reached, the “AutoLog
space is full” message will be displayed.
• Enter View Log Data mode and delete lots in order to free
space.
VIEW LOGGED DATA
Press the Recall function key to retrieve the information stored while in
measurement mode for the specific range. If the Recall function key is not
displayed press MENU key.
The Recall selection screen is displayed.
Press the corresponding function key to view the records.
If Man.Log is pressed, the list of records is displayed.
If no data were logged, the instrument will display “No Records”
message.
Use ARROW keys to scroll between the records from the list.
Press Delete All to enter
Delete All
screen.
Press Delete to enter
Delete records
screen.
Press More to view more information of the focused record.
If More is pressed.
Use ARROW keys to scroll between complete log information.
To Next Page
Loading...
Need help?
General
