16
DATA MANAGEMENT
You can keep track of your results using the instrument’s data log function. Up to 200 individual
measurements can be stored in the data log. Storing, viewing and deleting the data is possible using
LOG, RCL, t or s keys
..
..
.
Storing data
: You can store only a valid measurement. To store a valid measurement press LOG. The
measurement will be stored with date and time stamps.
Viewing and deleting
: You can view and delete the data log by pressing the RCL key. You can delete the last
saved measurement. Additionally, you can delete the data records all at once.
CHEMICAL FORM
Chemical form conversion factors are pre-programmed into the instrument and are method specific. In order
to view the displayed result in the desired chemical form press s or t to toggle between the available
chemical forms for the selected method.
To Next Page
Loading...
Need help?
General
