38
VIEW LOGGED DATA
The stored records can be viewed at any moment by
pressing RCL/GLP. To return to normal measurement
mode press RCL/GLP again.
LOG SEARCHING
The log records are stored in chronological order.
The first displayed record is the last stored one.
• Press UP or DOWN keys to scroll the log memory
record by record. By keeping pressed the UP or
DOWN keys, the scrolling speed will increase.
The scrolling of the log is possible from any
panel of the record, except “Delete last log”
and “Delete all logs” panels.
• When scrolling the log, the record number is
displayed for one second on the secondary LCD,
together with “TAG”, if the identification of
the sampling location was made. After this,
the range is displayed on the secondary LCD as
“turb”, “F.Cl” or ”t.Cl”.
When the end of the log is reached, a long
beep will be heard.
RECORD VIEWING
Each record contains more information than the
measured value. The additional information is
grouped in several panels.
Press READ/TIMER
to scroll through the record
panels. The record panels are displayed one by
one in a circular way.
Each record contains the following panels:
• The record value (turbidity, free or total chlorine
value) and range.
Note: If the logged sample value is an over range
reading, the maximum value will be displayed
blinking.
• The hexadecimal string of the tag for the sampling
location ID.
Note: If the ID data is missing, dashes are displayed
instead.
To Next Page
Loading...
Need help?
General
