47
46
8.1.11 Language
The language used in the meter user interface can
be changed. The default language is English.
Please contact your local Hanna office for currently
available languages.
8.1.12 Restore Factory Settings
This function restores measurement settings
to their original factory values. This includes
measurement units, coefficients, other measurement
configurations and all logged data. The factory
calibration for the sensor channels is not affected.
• Select the “Restore factory settings” and press
Select.
• The meter will ask to confirm: press Yes to confirm or No to escape.
8.2 PROBE SETUP
8.2.1 Probe ID
The probe can be labeled with an identification
code: press Modify and a text box will be displayed.
Use the keypad to enter the desired alphanumeric
code and then press Accept.
A maximum of 14 characters can be used.
8.1.8 LCD Backlight Intensity
The LCD backlight intensity can be adjusted with
this function. Use the arrow keys to change the level
and press Accept to save the new value. The default
value is 7.
8.1.9 Meter Password
The Meter Password protects against unauthorized configuration changes and
log data erasure. When implemented, many setting and functions cannot be
modified or viewed.
To enable the password proceed as follows:
• Highlight “Meter Password” and press Modify.
• Enter the desired password in the text box and press Accept.
Note While typing, the characters are masked with a “*” (star) symbol.
• The meter will require password confirmation. Retype the same password and
press Accept to confirm.
• The meter returns to the “Meter Setup” menu. The checkbox corresponding to
the meter password is checked.
To disable the password protection highlight “Meter Password” and press Modify,
enter the password and then press Disable. “No password” appears in the text
box. Press Accept to confirm.
8.1.10 Meter ID
The Meter ID may be used to uniquely identify a
meter/operator. Press Modify and a text box appears.
Use the keypad to insert the desired alphanumeric
ID and press Accept to store the identification. A
maximum of 14 characters can be used.
To Next Page
Loading...
Need help?
General
