15
14
METER BATTERY LIFE
The power consumption of the HI 9819X multiparameter systems are dependent
on two things:
1. The measurement system configuration (sensor configuration)
2. The meter configuration (logging interval and backlight use)
The following table estimates the meter’s battery life connected to a HI 769819X
probe with backlight off. (Note: backlighting use consume the most power).
The table variables, battery selection and parameter selection.
pH/ ORP, DO, EC
Backlight OFF, 1 s log 280 hours
Backlight OFF, 4 min log 360 hours
Backlight OFF, 10 min log 400 hours
Backlight ON, 4 min log 50 minutes
Backlight ON, 10 min log 50 minutes
SALINITY (HI 98194, HI 98195 only)
Range 0.00 to 70.00 PSU
Resolution 0.01 PSU
Accuracy ±2% of reading or ±0.01 PSU whichever is greater
Calibration Based on conductivity calibration
SEAWATER SIGMA (HI 98194, HI 98195 only)
Range 0.0 to 50.0 σ
t
, σ
0
, σ
15
Resolution 0.1 σ
t
, σ
0
, σ
15
Accuracy ± 1σ
t
, σ
0
, σ
15
Calibration Based on conductivity or salinity calibration
ATMOSPHERIC PRESSURE
Range 450 to 850 mm Hg; 17.72 to 33.46 in Hg;
600.0 to 1133.2 mbar; 8.702 to 16.436 psi;
0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution 0.1 mm Hg; 0.01 in Hg; 0.1 mbar
0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy ±3 mm Hg within ±15°C from calibration temperature
Calibration Automatic at 1 custom point
METER SPECIFICATIONS
Temperature Compensation Automatic from -5 to 55 °C (23 to 131 °F)
Logging Memory 45,000 records
(continuous logging or log-on-demand of all parameters)
Logging Interval 1 second to 3 hours
PC Interface USB (with HI 9298194 software)
Waterproof Protection IP67
Environment 0 to 50 °C (32 to 122 °F); RH 100 %
Battery Type 4 x 1.5 V, AA alkaline batteries
Battery Life 360 hours without backlight / 50 hours with backlight
Dimensions/Weight
221 x 115 x 55 mm (8.7 x 4.5 x 2.2”) / 750 g (26.5 oz.)
To Next Page
Loading...
