Hanna Instruments HI2550 - Page 34

34
For NaCl Range
• The conductivity and temperature reading value as described in
TDS Range.
• The time and date as described in pH Range.
• The salinity factor on the primary LCD and the record number on
the secondary LCD, with “RCL” and “NaCl” tags displayed.
• The cell constant message as described above.
Press the ALT&RCL keys to leave RECALL mode at any time.
Note: When an information that does not display the record number
is selected, pressing the SETUP key will display the record number
on the secondary LCD line.
• The time and the date as described in pH Range.
• The TDS factor on the primary LCD and the record number on the
secondary LCD.
• The temperature coefficient and the cell constant as described in
EC Range.
For TDS Range
• The temperature reading as described in pH range.
• The conductivity value on the primary LCD and the temperature
value on the secondary LCD.
• The temperature coefficient on the primary LCD and “tc” message
on the secondary LCD.