Hanna Instruments HI9064 User Manual

12 13
HI70605/2 Detachable interchangeable TFPC RH probe with 2 m
(6.6') cable and perforated cap (for HI 9065 only)
HI70605/5 Detachable interchangeable TFPC RH probe with 5 m
(16.5') cable and perforated cap (for HI 9065 only)
HI70607/2 Detachable interchangeable TFPC RH probe with 2 m
(6.6') cable and sintered cap (for HI 9065 only)
HI70607/5 Detachable interchangeable TFPC RH probe with 5 m
(16.5') cable and sintered cap (for HI 9065 only)
HI70608/2 Detachable interchangeable TFPC RH probe with 2 m
(6.6') cable (for HI 9064 and HI 9160 only)
HI70608/5 Detachable interchangeable TFPC RH probe with 5 m
(16.5') cable (for HI 9064 and HI 9160 only)
HI7101 Calibration chambers for probes with perforated cap,
complete with O-ring and precalibrated saturated salts
HI7111/P Spare saturation salts 6 x 15 g bottles of LiCl for low
range humidity calibration
HI7121/P Spare saturation salts 6 x 33 g bottles of NaCl for high
range humidity calibration
HI 710031 Hard carrying case
HI 721308 1.5V AA size alkaline battery (10 pcs)
MANRHWPR2 Instruction manual
FOR HI9065 ONLY
Interchangeable precalibrated temperature probes:
HI765AN Air Temperature Probe
HI765FN Surface Temperature Probe
HI765LN Liquid Temperature Probe
HI765PN Penetration Temperature Probe
HI9064, HI9065 and HI9160 are supplied with the advanced
"BEPS" Battery Error Preventive System technology that detects a low
power condition in the battery and prevents erroneous measurements
being taken due to low voltage.
For HI 9064 and HI 9065, upon depletion of the power in the
batteries up to a prefixed threshold, the LCD automatically switches
off.
For HI9160, when the batteries are low "V"
is displayed on the LCD to warn the user. This
is to inform the user that the display will be
shut-off after about 5 hours of use.
Battery replacement must only take place in a non hazardous area
using the battery types specified in this instruction manual (see page
13).
In order to replace rundown batteries, simply
remove the two screws on the rear cover of
the instrument and replace the four 1.5V AA
batteries with new ones, paying attention to
the correct polarity.
V
"BEPS" & BATTERY REPLACEMENT"BEPS" & BATTERY REPLACEMENT
"BEPS" & BATTERY REPLACEMENT"BEPS" & BATTERY REPLACEMENT
"BEPS" & BATTERY REPLACEMENT
ACCESSORIESACCESSORIES
ACCESSORIESACCESSORIES
ACCESSORIES

Hanna Instruments HI9064 Specifications

General

Brand	Hanna Instruments
Model	HI9064
Category	Measuring Instruments
Language	English