Hanna Instruments HI9811-5 User Manual

14
PROBES
HI1285-0 Combination, amplified pH/EC/TDS probe with built-in
temperature sensor, 8-pin DIN connector and 1 m (3.3’)
cable
HI1285-5 Combination, amplified pH/EC/TDS/temperature probe
with built-in temperature sensor, 8-pin DIN connector
and 1 m (3.3’) cable
pH BUFFER SOLUTIONS
HI7004L pH4.01 buffer solution, 500 mL bottle
HI7006L pH6.86 buffer solution, 500 mL bottle
HI7007L pH7.01 buffer solution, 500 mL bottle
HI7009L pH9.18 buffer solution, 500 mL bottle
HI7010L pH10.01 buffer solution, 500 mL bottle
CONDUCTIVITY & TDS CALIBRATION SOLUTIONS
HI7031L 1413 µS/cm solution, 500 mL bottle
HI7032L 1382 ppm (mg/L) solution, 500 mL bottle
OTHER SOLUTIONS
HI700661P Cleaning Solution, 20 mL sachet (25 pcs.)
HI70300L Storage Solution, 500 mL bottle
HI7073L Protein Cleaning Solution, 500 mL bottle
HI7074L Inorganic Cleaning Solution, 500 mL bottle
HI7077L Oil & Fat Cleaning Solution, 500 mL bottle
OTHER ACCESSORIES
HI710007 Shockproof rubber boot, blue
HI710008 Shockproof rubber boot, orange
HI710050 Blue protective case
ACCESSORIES

Hanna Instruments HI9811-5 Specifications

General

Range	0.0 to 14.0 pH 0 to 6000 µS/cm 0 to 3000 mg/L (ppm) 0.0 to 70.0 °C
Typical EMC Deviation	±0.1 pH ±2% f.s. µS/cm ±2% f.s. mg/L (ppm) ±0.5 °C
Conversion Factor	0.5
pH Calibration	Manual, 1-point through offset trimmer
EC/TDS Calibration	Manual, 1-point through slope trimmer
EC/TDS Temperature Compensation	Automatic from 0 to 70 °C (32 to 158 °F) with b=2%/°C
Resolution	0.1 pH 10 µS/cm 10 mg/L (ppm) 0.1 °C
Accuracy (@ 20 °C/68 °F)	±0.1 pH ±2% f.s. µS/cm ±2% f.s. mg/L (ppm) ±0.5 °C
Probe (included)	HI1285-5
Battery Type	1 x 9V alkaline
Battery Life	Approx. 450 hours of continuous use
Environment	0 to 50 °C (32 to 122 °F) 100% RH

Weight and Dimensions

Dimensions	145 x 80 x 36 mm (5.7 x 3.1 x 1.4”)
Weight	230 g (8.1 oz.)