Hanna Instruments HI9829 - CHAPTER 8 - SYSTEM SETUP; Meter Setup

52
Chapter 8 - SYSTEM SETUP
From the main menu, select “System setup” and then “Meter
setup” or “Probe setup”.
Note: If the password protection is enabled, you will
be required to enter the password before any settings
can be modified.
Time
The meter uses a real time clock for logging. The time and
time format are set in this function.
Press <Modify> and set the time using the keypad. Press
<Accept> to save the time. When using the 12 hour
format, press A or P on the keypad for AM or PM after you
set the time.
Press <Format> to change between 12 and 24 hour formats. The default format is 24 hours.
Date
The date and date format are set in this function.
Press <Modify> and set the date using the keypad.
Press <Accept> to save the date.
Press <Format> to change between the available date
formats: DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD,
YYYY‑MM‑DD, MM‑DD‑YYYY, and DD‑MM‑YYYY.
The default format is YYYY/MM/DD.
METER SETUP