69
• Press <Data> to return to the previous screen or <Jump> to select a different sample in the
same lot. When <Jump> is pressed, a text box appears to insert the desired sample number.
• Press ESC to return to the menu.
• Choose “Plot” and the meter will create a list with all
available parameters that can be plotted.
• Use the / keys to select the desired parameter. Press
<Select> to view the graph.
• Use the / keys to move the cursor in the graph and
highlight a sample. The sample data are displayed below
the graph.
• Press ESC to return to the parameter list.
• Press ESC again to return to the menu.
Note: The number of lot samples that can be plotted is
limited by the display resolution. To view a complete
graph download data to PC.
Delete all lots
• From ‘’Meter log recall’’ choose “Delete all lots” and the
meter will display the message “Do you want to perform
the current operation?”. Press <Yes> to delete or
<No> to return to the previous screen.
• To return to the “Log recall” menu, press ESC.
Probe log recall (Logging Probe only)
• Select “Probe log recall” to view and manage lots that are
stored on the probe.
• Select ”Lots” to display a list of available lots on the probe
(logs have a Plog prefix).
• To view basic information about the highlighted lot, press
<View>.
LOG RECALL
To Next Page
Loading...
