68
• All logged data can be viewed using two log recall options. The data logged on probe can be
accessed only if the probe is connected to the meter or to the HI929829 PC application by using
the “Probe log recall” option. The probe logs that have already been downloaded to the meter and
the data logged on the meter can be viewed using the “Meter log recall” option.
Meter log recall
• Select “Meter log recall” to view logs that are stored on
the meter. The meter will show the number of available
lots. Select “Lots” to view or delete individual lots.
• Use the / keys to select the desired lot and then
press <View>.
• The meter displays a summary of all data related to the
selected lot: number of samples, memory space used, time
and date of the first and last readings.
• Press <View> to display the sample details for each
point. Use the / keys to change the sample number
in the selected lot. The sample number is shown on the
bottom right corner of the display.
Note: Details are available only for the enabled
parameters.
LOG RECALL
• Press <Info> to see record information for the current
sample (time & date, remark, location (only for model with
GPS) and tag ID or serial number (if available).)
To Next Page
Loading...
