Hanna Instruments HI9829 - PROBE LOG (only for logging probes)

67
Continuous meter log
• Select “Start meter log” to log the currently enabled
parameters at the set logging interval on the meter.
• To set the logging interval, highlight “Start meter log” and
press <Options>.
The log interval time can set from 1 second to 3 hours. Press
<Modify> and use the / keys and keypad to enter
the desired log interval. Press <Accept> to confirm.
• Press <Select> to edit the lot, remark, or tag, see Log
Recall.
•
To stop the meter log, enter the log menu and select
<Stop meter log>.
• Select “Start probe log” to start a log with the current
settings. Press <Options> to change the log settings.
Probe Log Options
• To edit the lot remark, or tag, see Log Notes.
• The log interval time can be set from 1 second to 3 hours.
Press <Modify> to change the logging interval. Press
<Accept> to confirm.
• “Select logging param.” to modify the parameters to be
logged.
• To specify the log start time, highlight “Use start time” and
press <Enable>. Highlight “Log start time” and press
“Select”. Enter the desired time and press <Accept> to
confirm.
• To specify the log stop time, highlight “Use stop time” and
press <Enable>. Highlight “Log stop time” and press
<Select>. Enter the desired time and press <Accept>
to confirm.
LOGGING ON METER
PROBE LOG (only for logging probes)