Hannlomax HX-123CR - User Manual

To Next Page

PLL ALARM CLOCK RADIO

Model : HX-123CR

INSTRUCTION MANUAL

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user

to the presence of

uninsulated “dangerous

voltage” within the

products enclosure that

may be of sufficient

magnitude to constitute a

risk of electric shock to

persons.

Warning: To reduce the rise of

electric shock, do not remove

cover (or back) no

user-serviceable parts inside.

Refer servicing to qualified

service personnel.

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

2) Unplug the apparatus during lightning storms or when unused for long periods of time.

3) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

FCC NOTICE

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

-1-

Need help?

Do you have a question about the Hannlomax HX-123CR and is the answer not in the manual?

Summary

General Safety Warnings

Electrical Shock Hazard

Alerts users to the presence of uninsulated voltage within the enclosure.

Appliance Safety Precautions

Instructions to prevent electric shock and ensure safe operation, including water avoidance and dry cleaning.

Quick Reference Guide

Clock and Memory Controls

Buttons for setting clock, storing/selecting radio stations.

Time and Tuning Controls

Buttons for adjusting minutes, hours, and tuning radio stations.

Alarm and Volume Controls

Buttons for setting alarms, adjusting volume, and turning alarms off.

Snooze and Sleep Function

Controls for temporarily suspending alarms and setting sleep timers.

Indicators and Display

Descriptions of PM indicator, alarm indicators, and LED display.

Connections and Antenna

Details on DC jack, FM wire antenna, and battery compartment.

Operating Instructions

Setting the Clock

Step-by-step guide to set the current time on the clock radio.

Setting the Alarms

Instructions for setting alarm times and selecting alarm modes.

Snooze and Turn Off Alarm

How to use the snooze function and turn off an active alarm.

Listening to AM;FM Radio

Guide to tuning and listening to AM and FM radio stations.

Advanced Features and Specifications

Saving and Listening to Radio Stations

Instructions for storing favorite stations and recalling them.

Sleep to Music Function

How to set a timer to automatically turn off the radio.

Dimmer Control

Instructions for adjusting the display brightness.

Product Specifications

Technical details including frequency range, power supply, and battery.

The HANNLOMAX PLL ALARM CLOCK RADIO, Model HX-123CR, is a versatile alarm clock radio designed for everyday use, offering both timekeeping and radio listening functionalities.

Function Description:

This device primarily functions as an alarm clock with dual alarm settings and an integrated PLL AM/FM radio. It features a clear LED display for time and radio frequency, and a dimmer control to adjust display brightness. The radio allows for both manual and automatic station searching, and users can save up to 10 AM and 10 FM radio stations in memory for quick access. A "Sleep to Music" function is included, allowing users to fall asleep to radio music with a customizable timer. For convenience, it also incorporates a snooze function to temporarily suspend alarms.

Important Technical Specifications:

Frequency Range:
- AM: 520-1710 KHz
- FM: 87.5-108 MHz
Power Supply: AC 120V ~ 60 Hz
Rated Output: DC6V 100mA
Back-Up Battery: 2 pcs. UM4 AAA size (Batteries not included). This feature ensures that time and alarm settings are retained during power outages.

Usage Features:

The device is equipped with a user-friendly interface, featuring several buttons for various operations:

CLK / MEM: Used for setting the clock, storing radio stations in memory, and selecting stored radio stations.
MIN / K: Adjusts minutes for clock and alarm settings, and searches radio stations backward.
HOUR / »: Adjusts hours for clock and alarm settings, and searches radio stations forward.
DIMMER: Adjusts the brightness of the LED display.
AL2 / – (VOLUME): Sets alarm time for Alarm 2 and decreases volume.
AL1 / + (VOLUME): Sets alarm time for Alarm 1 and increases volume.
SOURCE / AL. OFF / : Turns the unit on, selects AM, FM, or AUX mode, and turns off the alarm.
SNOOZE (SLEEP): Temporarily suspends the alarm for 9 minutes and sets the sleep timer.

Setting the Clock:

To set the clock, press and hold the CLK / MEM button until the time flashes. Use the HOUR / »\ and MIN / K buttons to adjust the hour and minute, then press CLK / MEM again to confirm.

Setting Alarms:

The device supports two independent alarms (AL1 and AL2). To set an alarm, press either AL1/+ or AL2/- until the alarm time flashes. Adjust the hour and minute using the HOUR / »\ and MIN / K buttons. Confirm by pressing AL1/+ or AL2/- again. Users can select either a buzzer or a radio station as the alarm sound. The corresponding alarm indicator (buzzer or radio) will light up.

Snooze Function:

When an alarm activates, pressing the SNOOZE button will temporarily suspend it for 9 minutes. This can be repeated for up to approximately one hour.

Turning Off Alarms:

To turn off an active alarm, press the SOURCE / AL. OFF / button.

Listening to the Radio:

Press SOURCE / AL. OFF / to select AM or FM band. Use HOUR / »\ or MIN / K buttons for step-by-step tuning. Press and hold these buttons for approximately 1 second to automatically search for the next strong radio station. Weak stations must be tuned manually. To turn off the radio, press and hold SOURCE / AL. OFF / for approximately 1 second.

Saving Radio Stations:

Tune to the desired station, then press and hold CLK / MEM to store it. The display will show "PXX" (where XX is the memory station number from 01 to 10). Up to 10 AM and 10 FM stations can be saved.

Listening to Saved Stations:

After selecting the AM or FM band with SOURCE / AL. OFF /, press CLK / MEM to cycle through the stored radio stations.

Sleep to Music Function:

Press the SNOOZE button to activate the sleep timer. The default sleep time is 90 minutes. Repeatedly pressing SNOOZE will cycle through preset sleep times (90-80-70-60-50-40-30-20-10 minutes, or OFF). The radio will automatically turn off after the selected time.

Dimmer Control:

Press the DIMMER button to adjust the brightness of the LED display.

Maintenance Features:

Cleaning: The device should only be cleaned with a dry cloth.
Ventilation: Do not block any ventilation openings to ensure proper operation and prevent overheating.
Heat Sources: Avoid installing the unit near radiators, heat registers, stoves, or other heat-producing apparatus.
Power Cord Protection: Ensure the power cord is protected from being walked on or pinched, especially at plugs and where it exits the apparatus.
Attachments/Accessories: Only use attachments/accessories specified by the manufacturer.
Servicing: Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., damaged power cord/plug, liquid spilled, objects fallen into, exposed to rain/moisture, not operating normally, or dropped).
Lightning Storms/Long Periods of Disuse: Unplug the apparatus during lightning storms or when it will not be used for extended periods.

Safety Information:

The manual includes important safety warnings:

A lightning flash symbol indicates the presence of uninsulated "dangerous voltage" within the product enclosure, which could pose a risk of electric shock.
An exclamation point symbol alerts users to important operating and maintenance (servicing) instructions in the accompanying literature.
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. The unit contains no user-serviceable parts inside. Refer servicing to qualified service personnel.

FCC Notice:

The device complies with Part 15 of the FCC Rules, meaning it will not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

Specifications are subject to change without prior notice.