User’s Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located
on the right side of the monitor (See Figure 5). By changing these settings, the picture can
be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor. The power indicator will light up.
Figure.5. Control Panel Buttons
CONTROL PANEL BUTTONS:
1. Menu / Enter 2. Auto Adjustment
3. Volume + 4.
Volume –
5. Power Button 6. Power Indicator
12
To Next Page
Loading...
