Hansa C4 - What can my Hansa chipper process?

Hansa C4 O&M Manual - OM-005 Revision F 20/06/2019
© Hansa Chippers 2019
1
What can my Hansa chipper process?
Intended uses of the chipper
The Hansa C4 hipper is built to process organic material including wooden branches not exceeding 50 mm in diameter. It is designed
for intermittent use by the suburban gardener. Do NOT use the chipper for any other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Dry manure
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Bones
Soil, root balls, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 50 mm branch diameter
Receiving your Hansa chipper
You may receive your chipper assembled from your dealer or it may be packaged in two boxes. Assembly takes approximately 30
minutes, two people working together will make the assembly easier.
Chipper components
Note: Your Hansa C4 may not come with the chip catcher bag. The chip catcher bag may be purchased separately.