5 minutes for your safety ...
Seite GB-9
■ Do not use mechanical devices or
other means to accelerate the de-
frosting process, other than those re-
commended by the manufacturer.
For example, do not use any electric
heating equipment, knives or devices
with an open fl ame such as a candle.
The insulation is sensitive to scratch-
ing and heat or can melt.
■ When cleaning, please note:
– Never use harsh, granular, soda,
acid, solvent-based or abrasive
cleaners. These attack the plastic
surfaces. All-purpose cleaners with
a neutral pH are recommended.
– Door seals and plastic parts are
sensitive to oil and grease. Remove
contaminants as quickly as possi-
ble.
– Use only soft cloths for cleaning.
■ Wait 5 minutes after switching off.
Only then switch the appliance on
again.
■ Only use original accessories.
To Next Page
Loading...
