EasyManua.ls Logo

Hanseatic HTW8013C - User Manual

Hanseatic HTW8013C
82 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Toplader-Waschmaschine
Gebrauchsanleitung
HTW8013C
Anleitung/Version:
2101-01040 DE 20211106
Artikelnummer: 23686018
Nachdruck, auch aus zugs-
wei se, nicht ge stat tet!

Table of Contents

Questions and Answers

  • K
    Kayla GomezSep 8, 2025
    Why is water draining from my Hanseatic HTW8013C Washer when it's not pumping?
    • M
      Mark LeeSep 8, 2025
      If water is draining from your Hanseatic Washer even when it's not pumping, the outlet hose might be too low (place outlet hose higher).
  • J
    James CarsonSep 9, 2025
    How to remove mould stains from laundry washed in my Hanseatic Washer?
    • T
      Tasha Mccarthy DVMSep 9, 2025
      If your laundry has mould stains after washing in your Hanseatic Washer, it's likely because damp and/or worn laundry was left in the washing drum (remove mould stains carefully before the next wash, preferably with a special cleaner. Ask for advice at a chemist’s).
  • P
    pboydSep 12, 2025
    What does error code E30 mean on my Hanseatic HTW8013C?
    • L
      lgillSep 12, 2025
      Error code E30 on your Hanseatic Washer indicates that the appliance lid and/or washing drum are not closed. Close the appliance lid and/or washing drum properly and restart the cycle.
  • T
    Todd JonesSep 13, 2025
    What does error code E21 mean on my Hanseatic HTW8013C Washer?
    • D
      Dale GarrisonSep 13, 2025
      Error code E21 on your Hanseatic Washer means that the pump is faulty or the lint trap is clogged. Clean lint trap.
  • M
    Michele HansonSep 15, 2025
    What does error code E10 mean on my Hanseatic HTW8013C?
    • J
      Jessica HendersonSep 15, 2025
      Error code E10 on your Hanseatic Washer indicates that the water level in the appliance is lower than the heating coil. The water pressure to which the appliance is connected may be too low or the valve may be closed, so open the valve completely if necessary. Loosen any twists or knots in the water inlet hose.
  • M
    Mrs. Jamie RobertsonSep 18, 2025
    What does error code E12 mean on my Hanseatic HTW8013C?
    • A
      Annette NelsonSep 18, 2025
      Error code E12 on your Hanseatic Washer means there is too much water in the appliance. The appliance is automatically pumping water away. After draining, switch off the appliance, pull the mains plug out of the socket and close the valve.

Summary

Explanation of Terms and Symbols

Safety Information

Intended Use

Defines the appliance's intended purpose and limitations.

Safety Notices

Provides general safety guidelines for user protection and third parties.

Risks for Certain Groups of People

Details hazards for children and individuals with reduced capabilities.

Risks to Children

Highlights dangers like suffocation from packaging or small parts.

Electrical Appliance Safety

Risks in Household Electrical Appliances

Warns about electric shock hazards from appliance misuse.

Washing Machine Safety

Risks in Handling Washing Machines

Covers risks like poisoning, burns, scalding, explosion, fire, and injury.

Operating Controls and Appliance Parts

Cycle and Detergent Recommendations

Loading Laundry and Adding Detergent

Loading Laundry

Instructions on how to properly load the washing drum with laundry.

Adding Detergent and Fabric-Care Products

Adding Detergent;Fabric-care Products

Guidance on using the detergent dispenser for various products.

Operating Standard Cycles

Before Getting Started

Essential preparatory steps before selecting a cycle.

Selecting the Cycle

How to choose the appropriate wash cycle for your laundry.

Start Cycle

Steps to initiate the selected washing program.

Interrupting and Continuing a Cycle

How to pause and resume an ongoing wash cycle.

Operation: Cycle Adjustments

Changing Washing Water Temperature

How to adjust the water temperature for a cycle.

Changing Spin Speed

How to modify the spin speed for different drying levels.

Additional Functions

Start Time Preselection

Setting a delayed start time for the wash cycle.

Setting Start Time Preselection

Step-by-step guide to schedule the delayed start.

Terminate Delay

How to cancel a pre-set delayed start.

Basic Washing Tips

Preparing the Laundry

Steps to prepare clothes before washing.

Sorting Through Laundry

Guidelines for sorting laundry by fabric type, color, and soiling.

Tips for Delicate Textiles

Specific advice for washing delicate items like curtains and small garments.

The Right Washing Load

Guidance on how much laundry to load for optimal results.

Care and Maintenance

Regular Cleaning

How to clean the appliance periodically to prevent issues.

Cleaning the Drum

Instructions for cleaning the washing drum to remove residue and odors.

Installation, Connection, and Initial Commissioning

Check Package Contents

Verifying all supplied parts are present and undamaged.

Transport

Safety precautions and methods for moving the appliance.

Troubleshooting

Service and Support

Advice, Order and Complaint

Contact points for inquiries, orders, or issues.

Repairs, Replacement Parts and Accessories

Information on obtaining repairs and spare parts.

Disposal and Waste Prevention

Our Contribution to Protecting the Ozone Layer

Information on environmentally friendly packaging materials.

Disposing of Old Electrical Devices

Guidelines for the environmentally sound disposal of old appliances.

Waste Prevention

Measures for waste reduction, including repair and reuse.

Product Fiche and Technical Specifications

Technical Specifications

Lists key technical data and measurements of the appliance.

Hanseatic HTW8013C Specifications

General IconGeneral
BrandHanseatic
ModelHTW8013C
CategoryWasher
LanguageEnglish

Related product manuals