Operation
Page GB-15
2. Insert the mains plug (9) into a
properly installed socket.
(12)
(1)
3. Carefully press down on the
floor nozzle/turbo brush (12)
with your foot, and pull the
appliance handle (1) slightly
towards you.
(6)
4. Press the On/Off button (6) to
switch on the appliance.
5. To vacuum, push and pull the
nozzles across the
surface.
Rotate the handle (1) slightly to
reach corners better. This posi-
tions the nozzle diagonally.
In rare cases this can make
a whistling noise initially.
This is not a malfunction and
stops after a while.
Finishing vacuuming
(6)
1. Press the On/Off button (6) to
switch off the appliance.
2. Pull the mains plug (9) out of
the socket.
(5)
(10)
3. Rotate the upper mains cord
holder (5) back into the starting
To Next Page
Loading...
