OperationPage GB-18
(18) (2)
5. Attach the crevice nozzle (18)
and other components of the
3-in-1 tool, where required.
(19)
6. Rotate the toggle (19) an-
ticlockwise to the position
“HOSE”.
7. Switch the appliance on, as
described in Section „Vacuum-
ing floors“ on page GB-14.
8. If the 3-in-1 tool is no longer
required, rotate the tog-
gle (19) back into the position
“FLOOR”.
Moving the appliance
(26)
(25)
• To move the appliance over
short distances or stairs, lift the
appliance by the carrying han-
dle (26) of the dust bin lid (25).
(1)
(13)
• To move the appliance across
flat surfaces or longer dis-
tances, take it by the han-
dle (1), tilt slightly and use the
wheels (13).
To Next Page
Loading...
