hanshow HS_C09851 - Page 8

ESL Access Point HS_C09851 PRODUCT MANUAL
Page 8 , Total 15
Table 2-1 AP interface and function description
Interface
Name
Functional description
1
Power source
adaptor interface
12V-1A standard adapter access, Hanshow provide standard
12V adapter
2
Reset button
Restore factory settings button，Press this button for more than
5 seconds, the configuration can be reset. After reset, the
system automatically loads the default settings; do not need to
restart the ESL Access Point. Factory parameter see
"Configuration Guide"
3
USB Interface
Type A USB interface, standard USB device is adapted.
4
Ethernet interface
Standard 100M Ethernet interface, connected to customer
system via wire. POE powered supported.
5
Two digits Nixie
light
Green, and displays Access Point ID. (The direction of Nixie
light is aligned to interface direction. The Nixie light is correctly
displaying when interfaces is facing up)
6
5 LED lights
5 LED indicators for working status
7
One digit Nixie
light
Red indicates the Access Point condition. (The direction of Nixie
light is aligned to interface direction. The Nixie light is correctly
displaying when interfaces is facing up)
8
ESL Access Point
antenna
Four antennas for 2.4GHz wireless communication.
Can support synchronous transceiver mode, this mode is
completely controlled by the system, do not need artificial
configuration