Need help?Do you have a question about the Hantek Hantek2C72 and is the answer not in the manual?
General| Bandwidth | 70 MHz |
|---|---|
| Channels | 2 |
| Timebase Range | 5 ns/div - 500 s/div |
| Input Voltage Range | 400 V (DC + AC peak) |
| Connectivity | USB |
| Vertical Sensitivity | 10 V/div |
| Rise Time | <5ns |
| Input Impedance | 1 MΩ ± 2% |
| Input Coupling | DC, AC, GND |
| Interface | USB |
Describes the front panel layout and controls of the Hantek oscilloscope.
Explains the graphical user interface elements displayed on the oscilloscope screen.
Details steps for checking the instrument for damage and completeness upon receipt.
Explains how to perform various DMM measurements like voltage, current, resistance, etc.
Details how to set waveform type, frequency, amplitude, offset, and duty cycle.
Details horizontal, vertical, acquisition, and trigger parameters for the oscilloscope.
Lists waveform frequency, sampling, amplitude, and output characteristics.
Provides details on DMM resolution, testing modes, and input current/voltage.
To Next Page
