Hantek HDM3000 User Manual

13
Settings of RTD 2W or RTD 4W:
R0: R0 is an RTD nominal resistor at 0 ℃. The default value is 100 Ω
Aperture PLC: 0.02, 0.2, 1, 10, 100. Default value: 10
Units: °C, °F, or K
Settings of Thermis2W and Thermis4W:
Aperture PLC: 0.02, 0.2, 1, 10, 100. Default value: 10
Auto Zero: Off or On (Default) (2-wire measurement only; Not suitable for
4-wire measurement)
Units: °C, °F, or K
Keys
Application
Run and stop the measurement.
Save function.
Take a single measurement.
Take one or more hand-free measurement.
Take a null measurement.
Configure null functions, statistics, and limits.
Configure the text and graphics that appear on the display and secondary measurements.

Hantek HDM3000 Specifications

General

Brand	Hantek
Model	HDM3000
Category	Multimeter
Language	English