Safety requirements
EN
HDP10000 series user manual Copyright Qingdao Hantek Electronics Co., LTD
2
1.2 Security terms and symbols
Safety terms in the manual:
Warning:
Indicates that this operation may not cause immediate damage to you.
Note:
Indicates that you may damage the product or other property if you do so.
Safety terms on the product:
RATING:
Indicates that if you do not perform this operation, potential harm may be caused.
Safety symbols on the product:
1.3 Ventilation requirements
The instrument is forced cooled by a fan. Ensure that the intake and exhaust areas are
unblocked, and free flowing air is available. In order to ensure adequate ventilation,
when using the instrument in the workbench or rack, please make sure that the two
sides, above and behind should leave a gap of at least 10 cm.
Note:
Poor ventilation will cause the temperature of the instrument to rise, which will
damage the instrument. Good ventilation should be maintained when using.
Ventilation vents and fans should be checked regularly.
1.4 Work environment
Working conditions:
To Next Page
Loading...
Need help?
General
