Safety requirements
EN
Copyright Qingdao Hantek Electronics Co., LTD HDP10000 series user manual
3
Temperature -10 ° C to 40 ° C, relative humidity ≤80%
Storage conditions:
Temperature -20 ° C to 60 ° C, relative humidity ≤80%
Warning:
To avoid short circuit or electric shock, do not operate the instrument in a damp
environment.
Warning:
Ensure that no overvoltage (e.g. lightning) reaches the product. Otherwise, the
operator may be in danger of suffering from electric shock.
1.5 Maintenance and cleaning
Maintenance:
Do not expose the instrument to direct sunlight for a long time when storing or placing
the instrument.
Note:
To avoid damaging the instrument or accessories, do not place it in fog, liquid or
solvent.
Cleaning:
Check the instrument and accessories frequently as required by the operating
conditions. Clean the outer surface of the instrument according to the following steps:
1) Use lint-free cloth to remove floating dust outside the instrument and accessories.
Please be careful to avoid scratching the smooth display.
2) Clean the instrument with a soft cloth soaked in water. For a more thorough cleaning,
use a aqueous solution of 75% isopropyl alcohol.
Note:
To avoid damaging the surface of the instrument and accessories, do not use any
corrosive reagent or chemical cleaning reagent.
To Next Page
Loading...
Need help?
General
