EasyManuals Logo

Hanyoung RT9 Quick Start Guide

Hanyoung RT9
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
R T 9
R T 9
Zoom function
Various Alarm
Universal Input·Output
I n t e r f a c e (RS485)
Free scale
PID auto tuning
Record and Temperature
c o n t r o l
Universal Input·Output/Small-sized Temperature controler & Recorder
(±0.3 class high accuracy)
3
Features
Model : RT9
SAFETY INFORMATION
4
1
Before using, please read this (SAFETY INFORMATION) and then use this controller.
It is most important that the instructions in this manual are followed when using this instrument.
Please keep this manual for future reference.
Precautions are classified in WARNING and CAUTION.
WARNING
󱃦
Caution on wiring
Use an external protection circuit if a fault in the control loop could possibly lead to a serious
problem.
This instrument do not have a switch for power and a fuse, so please set them if it is needed.
(Fuse rating 250V, 0.5A)
󱃧
Power supply
Use a rated voltage to prevent damage or trouble.
To avoid electrical shock or damage, do not turn ON the power until the wiring is completed.
󱃨
Prohibit use in gas atmosphere
Do not use it at a place exposed to combustible or explosive gas.
󱃩
Handling of unit
To avoid malfunction, electrical shock or fire, this unit must not be disassembled or repaired.
Do not touch the terminals to avoid electrical shock or malfunction.
󱃪
Caution on maintenance
Turn OFF the power before mounting or removing the instrument.
To ensure continuous and safe operation of the instrument, periodical maintenance is
recommended. Some parts are limited in life.
The warranty period is 1 year only if using in the correct way.
CAUTION
󱃦
Caution on handling
󱅓
Do not install the instrument under any of the following condltions.
The ambient temperature exceeds 0 ~ 50℃
The ambient humidity exceeds 20 ~ 90%RH.
A place where temperature changes suddenly or icing occurs.
A place exposed to corrosive gas or combustible gas.
Vibration or shock is likely to be transmitted to the instrument.
A place exposed to water, oil, chemicals, steam, sunlight.
A place exposed to much dust, salt or iron.
A place with much inductive disturbance, static electricity, magnetism noise.
A place where heat such as radiant heat stays.
WARNING
CAUTION
There is a possibility of death or heavy injury when handling in wrong way.
There is a possibility of injury or physical damage when handling in wrong way.

Other manuals for Hanyoung RT9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hanyoung RT9 and is the answer not in the manual?

Hanyoung RT9 Specifications

General IconGeneral
BrandHanyoung
ModelRT9
CategoryController
LanguageEnglish

Related product manuals