Need help?Do you have a question about the Hanyoung NP100 and is the answer not in the manual?
General| Brand | Hanyoung |
|---|---|
| Model | NP100 |
| Category | Controller |
| Language | English |
Critical warnings regarding immediate hazards and electric shock.
Essential precautions to prevent accidents, electric shock, and malfunctions.
Critical safety warnings and instructions for wiring the controller.
Details input wiring precautions, sensor types, and measurement ranges.
Explains different control output types and their respective wiring requirements.
Steps to enter and configure the engineering group settings.
Details input signal types, measurement ranges, and scaling.
Explains the process of selecting various sensor and input types.
Choosing output type and setting heating/cooling control.
Safety warnings for communication wiring and protocol selection.
Choosing the signal for retransmission and setting its maximum/minimum values.
Safety and wiring guidelines for alarm output connections.
Selecting alarm types and configuring the ON-OFF width (dead band).
Setting proportional, integral, and differential time for PID control.
Choosing the auto tuning method and enabling/disabling its operation.
Steps for performing auto tuning and how to stop the process.
Configuring pattern numbers and individual program segments.
Configuring the number of repetitions for a program.
Selecting patterns and setting up individual segments.
Detailed specifications for input channels, types, ranges, and accuracy.
Specifications for various control output types.
Specifications for the relay alarm output.
To Next Page
