NP100
Before you use, read safety precautions carefully, and use this product properly. The precautions
described in this manual contains important contents related with safety; therefore, please follow the
instructions accordingly. The precautions are composed of DANGER, WARNING and CAUTION.
Do not touch or contact the input/output terminals because they may cause electric shock.
1. If there is a possibility of an accident caused by errors or malfunctions of this product, install external
protection circuit to prevent the accident.
2. This product does not contain an electric switch or fuse, so the user needs to install a separate electric
switch or fuse externally. (Fuse rating : 250V 0.5A)
3. When setting, “Input type selection number” must be selected in the Group Input(G.In) and also
“Output type selection number” must be selected in the Group Output(G.Out) before moving to other
group. If not, data of other group will be changed to the initial stage.
4. To prevent defection or malfunction of this product, supply proper power voltage in accordance with
the rating.
5. To prevent electric shock or devise malfunction of this product, do not supply the power until the wiring
is completed.
6. Since this product is not designed with explosion-protective structure, do not use it at any place with
flammable or explosive gas.
7. Do not decompose, modify, revise or repair this product. This may cause malfunction, electric shock or
fire.
8. Reassemble this product while the power is off. Otherwise, it may cause malfunction or electric shock.
9. It you use the product with methods other than specified by the manufacturer, there may be bodily
injuries or property damages.
10. Due to the danger of electric shock, use this product installed onto a panel while an electric current is
applied.
1. The contents of this manual may be changed without prior notification.
2. Before using the product you have purchased, check to make sure that it is exactly what you ordered.
3. Check to make sure that there is no damage or abnormality of the product during delivery.
4. The ambient temperature do not exceed 0~50
& The ambient humidity do not exceed 35~85%RH
(no icing).
5. Do not use this product at any place with corrosive(especially noxious gas or ammonia) or flammable
gas.
6. Do not use this product at any place with direct vibration or impact.
7. Do not use this product at any place with liquid, oil, medical substances, dust, salt or iron contents.
(Use at the Pollution level 1 or 2)
8. Do not polish this product with substances such as alcohol or benzene.
9. Do not use this product at any place with excessive induction trouble, static electricity or magnetic
noise.
To Next Page
Loading...
Need help?
General
