Harbor Breeze 0807421 User Manual (English)

Other manuals for Harbor Breeze 0807421

Quick Start Guide17 pages

Manual17 pages

Questions and Answers:

N
nicolegonzalezAug 8, 2025
What to do if Harbor Breeze 0807421 Fan does not move?
- R
  richard31Aug 8, 2025
  If your Harbor Breeze Fan isn't moving, first, ensure the reverse switch is fully engaged by pushing it firmly either left or right. Then, check if the power is on or if a fuse has blown at the circuit breaker. If the issue persists, turn off the power and check all wire connections in the motor assembly. Also, check that male and female plugs in fitter plate are connected properly according to instructions. Finally, the learning code process between fan and remote control transmitter may not have been successful and learning code was not activated, so turn off the power and repeat instructions.
K
Karen BushAug 13, 2025
What to do if Harbor Breeze 0807421 Fan operates but light fails?
- Y
  youngjoshuaAug 13, 2025
  If your Harbor Breeze Fan operates but the light fails, first check the wires in the outlet box and re-wire if necessary. Ensure that the wall switch to the light is turned on. Also, verify that the molex connections in the fitter plate are properly connected.
C
Casey KnightAug 17, 2025
What to do if my Harbor Breeze 0807421 does not move?
- S
  sarashermanAug 18, 2025
  If your Harbor Breeze Fan isn't moving, there could be several reasons. First, ensure the reverse switch is fully engaged by pushing it firmly to the left or right. Check that the power is on and the fuse at the circuit breaker is working. Turn the power off and check all wire connections in the motor assembly, making sure they are secure. If you have a light kit, verify that the male and female plugs in the fitter plate are correctly connected. Finally, the learning code process between the fan and remote control transmitter may not have been successful, so turn off the power and repeat the learning code instructions.
C
Connie BallardAug 23, 2025
What to do if my Harbor Breeze 0807421 Fan works but the light doesn't?
- A
  Ann AndersonAug 23, 2025
  If your Harbor Breeze Fan operates but the light fails, begin by checking the wires in the outlet box and re-wire if necessary. Ensure that the wall switch to the light is turned on. Also, check that the molex connections in the fitter plate are properly connected.
E
edavisAug 27, 2025
Why is my Harbor Breeze 0807421 so noisy?
- W
  William CarrollAug 28, 2025
  If your Harbor Breeze Fan is operating noisily, start by tightening all blade screws. If the noise continues, check for cracked blades and replace them if necessary. Ensure that you are only using the included speed control device and not a full range dimmer switch. New fans may require a 'break in' period of a few days, especially when running the fan at medium and high speeds. Also, verify that the motor assembly is securely mounted.
D
Daniel PopeSep 2, 2025
How to fix excessive wobbling in a Harbor Breeze Fan?
- M
  Michelle MccoySep 2, 2025
  If your Harbor Breeze Fan is wobbling excessively, begin by tightening all blade screws. If wobbling persists, check that the blades are correctly attached. Try switching one blade with a blade from the opposite side to address potential imbalances. Also, verify that the fan is securely mounted.

Harbor Breeze 0807421 Specifications

General

Model Number	0807421
Brand	Harbor Breeze
Number of Blades	5
Reversible Motor	Yes
Number of Speeds	3
Control Type	Pull chain
Warranty	Limited lifetime
ENERGY STAR Certified	No
Remote Control Included	No
Category	Fan
Blade Span	52 inches
Motor Type	AC