This document describes the Altissa Ceiling Fan, models #42079 and #42242, manufactured by Harbor Breeze. It is a comprehensive guide covering installation, operation, maintenance, and troubleshooting for the ceiling fan.
The Altissa Ceiling Fan is designed to provide air circulation and illumination in residential settings. It features a motor assembly, five blades, a light kit with two bulbs, and a glass globe. The fan can be installed using either a standard mounting or an angle mounting method, depending on the ceiling type and height. It is not suitable for flushmount or closemount installations. The fan's design includes a yoke cover, canopy, and a light frame, contributing to its aesthetic appeal.
Function Description:
The primary function of the Altissa Ceiling Fan is to circulate air and provide lighting. The fan operates with a multi-speed motor, controlled by a pull chain, offering four speed settings: HIGH, MEDIUM, LOW, and OFF. This allows users to adjust the airflow to their comfort level. The fan also includes a reverse switch, which enables seasonal operation. In warmer weather, setting the reverse switch to the left (sun icon) creates a downward airflow, producing a wind chill effect. In cooler weather, setting the switch to the right (snowflake icon) generates an upward airflow, helping to move stagnant, warm air from the ceiling area. It is crucial that the reverse switch is fully engaged in either the left or right position for the fan to operate correctly; if it is in the middle, the fan will not function.
The integrated light kit provides illumination. It accommodates two E26-base LED, CFL, or incandescent bulbs, with a maximum wattage of 60 watts per bulb. Halogen bulbs are not recommended. The light kit is also controlled by a separate pull chain, allowing users to turn the lights ON and OFF independently of the fan speed. The fan's wiring is designed to support separate control of the fan and light if a second hot/power wire is available from the outlet box.
The fan is designed for damp locations, making it suitable for covered outdoor areas or bathrooms where it may be exposed to moisture but not direct water spray. The mounting bracket is engineered to support the fan's weight and ensure stability, which is critical for minimizing wobble and noise during operation.
Usage Features:
The Altissa Ceiling Fan offers several features for user convenience and safety:
- Mounting Options: The fan supports standard mounting for ceilings 8 ft or higher and angle mounting for vaulted ceilings up up to 16 degrees. This flexibility allows for installation in various room configurations.
- Adjustable Airflow Direction: The reverse switch is a key feature, enabling the fan to be used year-round to optimize comfort and energy efficiency. Users can easily switch between downdraft (summer) and updraft (winter) modes.
- Multi-Speed Control: The fan's four-position pull chain control provides precise adjustment of fan speed, from a gentle breeze to a strong airflow.
- Independent Light Control: A separate pull chain for the light kit allows users to control the lighting independently, offering flexibility in room ambiance.
- Bulb Compatibility: The light kit is compatible with common bulb types (LED, CFL, incandescent), providing options for energy efficiency and light output.
- Damp Location Rated: This rating expands the fan's applicability to areas with higher humidity, such as covered patios or bathrooms, enhancing its versatility.
- Safety Guidelines: The manual emphasizes critical safety information, including the need to disconnect power before installation, proper wiring connections, and ensuring the outlet box is securely mounted and rated for fan support. It also warns against using full-range dimmer switches for fan speed control, as this can cause humming noise and poses a risk of fire or electric shock.
- Blade Clearance: Instructions specify maintaining a minimum clearance of 7 ft from the blades to the floor and 30 in. from the end of the blades to any obstruction, ensuring safe operation.
- Wire Management: The manual provides detailed steps for wire connections, including cutting lead wires to an appropriate length and securing connections with wire connectors and electrical tape, to ensure a safe and tidy installation.
Maintenance Features:
Maintaining the Altissa Ceiling Fan is straightforward, focusing on routine checks and cleaning to ensure longevity and optimal performance:
- Screw Tightening: Users are advised to tighten all screws on the fan at least twice a year. This helps prevent parts from loosening due to vibration during operation, which can contribute to wobbling and noise.
- Cleaning: The motor housing should be cleaned with a soft brush or a lint-free cloth to avoid scratching the finish. The fan blades should also be cleaned with a lint-free cloth. It is crucial to shut off the main power supply before performing any cleaning or maintenance tasks. Water or damp cloths should not be used to clean the ceiling fan.
- Bulb Replacement: When bulbs need replacement, users should use 60-watt maximum E26-base LED, CFL, or incandescent bulbs. Halogen bulbs are not recommended. This ensures compatibility and prevents potential issues with the light kit.
- Troubleshooting Guide: The manual includes a comprehensive troubleshooting section that helps users diagnose and resolve common issues such as the fan not moving, excessive wobbling, or lights not working. This guide provides possible causes and corrective actions, empowering users to address minor problems without professional assistance. For example, if the fan wobbles, users are instructed to check and tighten blade screws, balance blades, or verify the security of the mounting bracket. If the fan is noisy, checking blade tightness, replacing cracked blades, or ensuring the outlet box is secure are suggested solutions.
- Warranty Information: The fan comes with a limited lifetime warranty on the motor assembly and a one-year warranty on all other parts (excluding glass or plastic blades). This provides assurance and support for potential manufacturing defects. The warranty emphasizes that improper installation, misuse, or the use of unauthorized parts will void the warranty. It also notes that minor "wobble" is normal and not considered a defect.
Overall, the Altissa Ceiling Fan is designed for reliable performance, ease of use, and simple maintenance, making it a practical addition to various indoor and damp outdoor spaces.
To Next Page
General
