11
Lowes.com/harborbreeze
It is recommended you test the fan before finalizing
installation. Restore power from circuit box. Test
fan speeds with wall control on the left side of fan
assembly. Start at the Off position (no blade
movement). One turn of the dial will set the fan to
HIGH (H). Two turns will set the fan to MEDUIM
(M). Three turns will set the fan to LOW (L).
Test the oscillation function with the wall control on
the right side of the fan assembly. Start at the Off
position and turn to the On position.
If fan does not function properly, please refer to
“Troubleshooting” section.
OPERATING INSTRUCTIONS
1.
2.
Off
On
2
2
2
1
Off
H
M
L
A
A
To Next Page