Harbor Breeze MONTCLAIR E-CM54RBZ5CRCI User Manual

SOS ITEM/ARTICULO SOS #0125086
MONTCLAIR/CEILING FAN
MONTCLAIR
/VENTILADOR DE TECHO (página 13)
MODEL/MODELO #E-CM54RBZ5CRCI
WARNINGS
• READ AND SAVE THESE INSTRUCTIONS.
• Read this manual carefully and completely before attempting to assemble, install or operate this product.
• Be sure you read and understand the Safety Precautions on page 3 of these instructions.
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be
shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for
return.
• CAUTION: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.
• WARNING: To reduce the risk of fire or electric shock, do not use the fan with any solid state speed
control device or control fan speed with a full range dimmer switch.
• WARNING: To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms when
installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between the rotating fan
blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and use mounting screws provided with
the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified electrician if in doubt.
Questions, problems, missing parts? Before returning to your retailer, call or contact our customer service
department at 1-800-527-1292, 8:30 a.m.-5:00 p.m., CST, Monday-Friday.
Harbor Breeze® is a registered trademark of LF, LLC.
All Rights Reserved.
Federal regulations require ceiling fans with light kits manufactured or imported after
January 1, 2009, to limit total wattage consumed by the light kit to 190W. Therefore,
this fan is equipped with a wattage limiting device.
E192641

Harbor Breeze MONTCLAIR E-CM54RBZ5CRCI Specifications

General

Brand	Harbor Breeze
Model	MONTCLAIR E-CM54RBZ5CRCI
Type	Ceiling Fan
Blade Span	54 inches
Number of Blades	5
Light Kit Included	Yes
Control Type	Remote Control
Motor Type	AC Motor
Mounting Options	Downrod mount
Indoor/Outdoor	Indoor
Bulb Type	LED
Reversible Motor	Yes
Finish	Bronze

Summary

Safety Information

Pre-Installation Safety Checks

Ensure power is off, read instructions, use gloves, and comply with electrical codes.

Mounting and Electrical Safety

Ensure proper clearance, secure mounting box, and use correct wire connectors.

Operational Warnings

Avoid solid-state controls, do not bend blades, use only provided parts.

Preparation

Initial Installation Steps

Disconnect power, determine mount type, check clearance, secure mounting bracket, remove stabilization plate.

Fan Mounting

Downrod and Ball Installation

Prepare motor housing, install downrod, secure with pin/clip, and attach ball to mounting bracket.

Wiring Safety Precautions

Use correct wire connectors, verify wire colors, and ensure proper grounding.

Wiring for Remote Control and Fan

Wiring Connections

Make wiring connections using provided connectors, tape wires, and slide in the receiver.

Remote Control Specifications

Details electrical rating, motor amps, and light watts for the remote.

Final Installation

Canopy Attachment

Attach canopy and canopy cover to the mounting bracket using screws.

Blade and Arm Attachment

Secure blade arms to the motor using screws and lock washers.

Light Kit and Shade Installation

Install shade fitter, light kit fitter, bulbs, and glass shade using screws.

Automated Learning Process

Setting the Remote Control Code

Set code switches, dimmer switch, and install battery for remote transmitter.

Pairing Remote to Fan

Restore power and press FAN/OFF for 5 seconds to pair the remote with the fan.

Remote Control and Fan Operation

Remote Control Buttons

Explains function of HI, MED, LOW, FAN/OFF, TOP LIGHT, BTM LIGHT buttons.

Fan Reverse Switch Function

Explains how to use the reverse switch for warmer or cooler weather.

Lighted Housing Bulb Replacement

Bulb Replacement Procedure

Allows motor housing and bulbs to cool, removes access cover, replaces burnt-out bulb.

Care and Maintenance

Routine Cleaning and Tightening

Tighten screws, clean motor housing and blades with soft cloth, avoid water.

Troubleshooting

Fan Does Not Move

Addresses issues like reverse switch, power, or connections preventing fan movement.

Noisy Operation

Covers loose blades, cracked blades, or new fan noise.

Excessive Wobbling

Addresses loose blades, incorrect arm attachment, unbalance, or mounting issues.

Fan Operates But Lights Fail

Troubleshoots issues with bulb installation, wiring, or wattage limitations.

Remote Control Issues

Covers learning process errors or battery issues for remote operation.

Warranty

Limited Lifetime Warranty Details

Outlines warranty coverage, exclusions, and claim procedures.