To Next PageTo Next PageWhy does my Harbor Freight Tools 43149 Metal Detector display false signals?
False signals may appear on your Harbor Freight Tools Metal Detector if you are sweeping too fast or at the wrong angle. Try pinpointing the target from several different angles. Also, heavily oxidized metals can cause false signals. If the detector does not display and sound the same signal each time, the target is probably heavily oxidized metal.
General| Brand | Harbor Freight Tools |
|---|---|
| Model | 43149 |
| Category | Metal Detector |
| Language | English |
Essential safety instructions for using the metal detector, including handling, environment, and personal protection.
Step-by-step guide for assembling the metal detector, including stem adjustment and coil attachment.
How to power on the metal detector and select operating modes for different detection scenarios.
Adjusting the detector's receiver and transmitter for consistent pointer and tone indications.
Method for testing the detector's reaction to different metals in a controlled indoor environment.
Guide for testing the detector's performance and sweep techniques in an outdoor setting.
Optimizing the search coil's ability to detect objects at various depths in the ground.
Critical step to tune out false signals from mineralized soil for accurate operation.
