To Next PageTo Next PageWhy is my Harbor Freight Tools Insect Control Equipment constantly zapping?
The constant zapping from the grid of your Harbor Freight Tools Insect Control Equipment is likely due to debris causing a short circuit. You should clean the grid as described on page 7.
What to do if the bulb in my Harbor Freight Tools Insect Control Equipment doesn't light, but the grid has voltage?
If your Harbor Freight Tools Insect Control Equipment's grid has voltage but the bulb isn't lighting, it could be due to a bad bulb. Try replacing the bulb. Alternatively, the bulb may not be properly seated in the socket. Ensure the bulb's four pins are correctly inserted into the socket.
Why is my Harbor Freight Tools OUTDOOR BUG ZAPPER Insect Control Equipment zapping weakly?
If your Harbor Freight Tools Insect Control Equipment shows low or weak zapping, it may be due to a low insect population density. Verify this by checking the area for insect remains. If the insect population is indeed low, consider moving the unit to a new location.
General| Voltage | 120V |
|---|---|
| Coverage Area | 1/2 acre |
| Bulb Type | UV |
| Power Source | Electric |
| Construction | Plastic housing |
| Mounting Type | Hanging |
| Weather Resistance | Weatherproof |
Follow crucial safety warnings to prevent fire, electric shock, and injury during use.
Ensure proper grounding wire connection to prevent electric shock and death.
Understand the requirements and usage of double insulated tools with two-prong plugs.
Guidelines for selecting and using appropriate extension cords for safe operation.
Understand the meaning of product symbols for safe and correct operation.
Heed warning symbols for fire risk and electric shock hazards.
Key technical details including electrical rating, grid voltage, and bulb type.
Properly install the bug zapper at a safe distance and suitable location.
Steps for plugging in, operating, and safely storing the bug zapper.
Perform pre-use checks for damage and periodically clean the exterior.
Instructions for removing insects and safely replacing the bulb.
Diagnose and resolve issues like no bulb light, constant zapping, or low zapping.
