Page 6 For technical questions, please call 1-888-866-5797. Item 59709
Maintenance
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Unplug the product from its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM PRODUCT FAILURE:
Do not use damaged equipment. If damage is noted, have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the product. Check for:
• loose hardware
• misalignment or binding of moving parts
• damaged cord/electrical wiring
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. PERIODICALLY, clean the exterior of
product with nonabrasive glass cleaner and
a clean cloth. Do not clean this product
with a water spray or similar method.
3. WARNING! To reduce the risk of fire and
serious injury: remove insects frequently. Use
compressed air to remove insect remains from Grid.
Relamping
1. Rotate the Cover to remove.
Cover
2. Remove the three screws retaining
the Grill to the unit.
Grill
3. Remove the Bulb by gently pulling it out.
Bulb
4. Install the new Bulb making sure the
four pins are properly aligned.
Bulb
5. Replace Grill and Cover.
To Next Page
Loading...