EasyManua.ls Logo

Harbor Freight Tools OUTDOOR BUG ZAPPER - Set-Up and Operation; Installation Guidelines; General Operation Instructions

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 5For technical questions, please call 1-888-866-5797.Item 59709
Set-Up and Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Installation
WARNING! TO PREVENT SERIOUS INJURY:
Install product at minimum 20ft distance from spaces
with continuous, 8-hour human activities so that
people are not continuously exposed to UV.
Note: If a water source is present, place the unit between
the water source and the area to be protected.
Determine a suitable location and hang the
unit approximately 5-7ft off of the ground by
the metal ring on the top of the unit.
General Operation
1. Plug unit into a grounded 120VAC, GFCI
protected outlet. The unit will turn on. Allow
3-4 minutes for the Bulb to light completely.
2. To prevent accidents, unplug after use.
Clean, then store the product indoors when
not in use - out of reach of children.