Harley Benton DNAfx GiT - Expression Pedal Settings and Calibration

4. Press the expression pedal.
ð
The expression pedal is activated. The LED [EXP] lights up.
1. Press [EXP].
ð
The menu for setting the expression pedal is called up.
2. Press [VALUE] until the display shows ‘FUNCTION’ .
3. Press [VALUE].
4. Turn [VALUE] to select the desired parameter you want to set.
5. Press the expression pedal.
ð
The set parameter is activated.
1. Press [EXP].
ð
The menu for setting the expression pedal is called up.
2. Lower the Expression Pedal to the rear and press [VALUE].
ð
The setting is conrmed.
Calling up the expression pedal
settings
Calibrating the expression
pedal
Operating
DNAfx GiT
29
Multi Eects Unit